Conveyor Belt Fasteners

Conveyor belt repair accessories, templates and tools

The ACT Group offers a variety of conveyor belt fasteners, splicing tools and lacing supplies to assist with your belt replacements and repairs. We proudly carry the entire line of belt fasteners from Minet Lacing Technologies, including the extremely versatile Super-Screw®!

Super-Screw®

Minet Lacing Technologies has developed this flexible rubber splice that screws directly onto the belt. The Super-Screw® uses specifically designed self-drilling, self-tapping screws that preserve the belt’s integrity by spreading the carcass threads without cutting them.

This technology allows the Super-Screw® to be installed regardless of the accessibility to the conveyor belt or weather conditions, while significantly reducing downtime. Simple and practical, the Super-Screw® is also available in different qualities of rubber (MHSA, Grade 1 abrasion resistant, Stainless Steel, HOT, Friction or Bare Back).

 

 Belt Skiver-PS15 Standard

The PS15 Standard Belt Skiver is a must have for any maintenance department. Save time and money with this easy-to-use belt skiving system. This conveyor belt skiver showcases the following features:

  • Handle is very ergonomic and comfortable.
  • Every size blade can be fitted on the cutting head in one operation, clamps are spring loaded.
  • Can skive on any part of your belt.
  • Can skive your belts from 1/16” to 5/8” deep.
  • Each part is available as a spare part.

 

Gorflex

The Gorflex Plate Fasteners come with a range of hand tools and with assistance of readily available power tools.  These plate fasteners are also ideally suited for the quick repair of belt tears. Easily installed, these belt fasteners also come with other popular features:

  • They are suitable for a wide range of belt thicknesses (5mm-24mm or 3/16”-1”)
  • They are also suitable for a wide range of belt widths. Butted belt ends make a sealed type belt joint; this can be further enhanced with the use of Gortape to seal the joint.
  • It has excellent impact resistance and is particularly suitable for hard rock conveying systems due to their long life and wear resistance.
  • Gorflex can be used for general applications and the transportation of sand, gravel, cement, crushed stone, coal, salt, and belt tear repairs.

Packaging Details:

  • Each set includes one top plate, one bottom plate, two bolts and two nuts.
  • Types 2½ and 3 have an additional circlip.
  • Types 140/190/1½/2 come in 25 sets per box and 100 sets per bucket.
  • A set of installation tools includes 1 punch, 1 wrench, and 2 bolt breakers. There are 3 tool sets, please refer to the technical parameter above.
Belt Fasteners info

SOLID STRIP BELT FASTENERS

Goro Record V6 (RV6)

One complete fastener strip is installed on the belt across the full width preventing loss or damage during transportation and storage. The single fastener size is suitable for a wide belt thickness.

RV6 can be used for a belt thickness of 6-12mm, making the RV6 easy for the customers to manage.

High strength of the joint. The V shape of the staple arrangement enables a high density of staple penetration on

Good alignment of the joint. Install the fasteners using the hammer tool on either side and in the center of the splice ensuring they are square to the belt and then install across the full width. Because of the good alignment, it is very easy for the connecting pin to be inserted.

Less impact during the operation. The V-shaped low and flat plate body has a chamfered leading edge which decreases the impact and wear to idlers, pulleys and cleaners during the operation of the conveyor.

Improved life of the pin. The loop section of the fastener is designed to maintain a good even radius after the fastener is clenched, thus providing a good working surface for the connecting pin to interact with.

Technical Parameter

conveyor belting accessories

Packaging Details:

2 strips (1 set) of the fasteners in each box for 1 joint.

Installation Requirements:

The RV6 fastener is installed with a Hammer Tool. Special instructions are required to use this tool. ACT has this tool available for purchase. Read on.

style="color: #f47323;">STAGGERED FASTENERS-NORMAL REACH

TITAN T10H & T10 Twin Staple Conveyor Belt Fasteners

The T10 series are in two categories: T10H and T10. These two series differ by the opening angle of the fastener. Both fasteners can be made in carbon steel or stainless steel. Underground and surface mining applications available.

  1. T10H: Installed with a hammer tool
  2. T10: Installed with a lever style fixing tool, MINI MATIC

Product Features:

  • Twin staple fastener
  • Good for deep troughed belts whose troughing angle is 45 degrees
  • Complete range for the belt thickness from 7.5mm to 16mm
  • The staggered arrangement of the staples enables a belt splice with a high tensile and dynamic strength to be installed
  • Loads are spread across the staggered staple arrangement
  • The front edge of the fastener is chamfered which decreases the impact on idlers and belt cleaners
  • Easy installation of the fasteners is achieved by the hammer tool (T10H) or by the lever style fixing tool (T10)

RV6 Hammertool

This hammertool allows the installation of the Record V6 fasteners in a single operation with a punch and a hammer and is open-ended for continuous lacing of wider belts.

Hammertool ONLY

Reference

107203-KIT

107205-KIT

107207-KIT

107209-KIT

Description

Record V6 Hammertool 900 mm (36″)

Record V6 Hammertool 1050 mm (42″)

Record V6 Hammertool 1200 mm (48″)

Record V6 Hammertool 1400 mm (54″)

 

KIT INCLUDES 1-Hammertool & 1-Drive punch

Reference

103205-KIT

103207-KIT

103208-KIT

103210-KIT

Description

Record V6 Hammertool 900 mm (36″)

Record V6 Hammertool 1050 mm (42″)

Record V6 Hammertool 1200 mm (48″)

Record V6 Hammertool 1400 mm (54″)

 

Aluminum Hammertool ONLY

Reference

103405-HT

103407-HT

103408-HT

103410-HT

Description

Light Weight RV6 Hammertool 900mm(36”)

Light Weight RV6 Hammertool 1050 mm (42″)

Light Weight RV6 Hammertool 1200 mm (48″)

Light Weight RV6 Hammertool 1400 mm (54″)

 

Spare parts:

Reference

103301

103302

103303

103304

103305

103306

103307

103309

4020088

Description

Matrix

RV6 drove-in punch

Record V6 Guide Pin (Broche)

Round punch

Profiled punch

Retaining Plate

Dowell Pin

Locking Pin

Drive Punch handle

 

Titan Hammertool

This hammertool allows the installation of the TITAN 10H fasteners in a single operation with a punch and hammer and is open-ended for continuous lacing of wider belts. It can also install the GORO 20002 fasteners.

KIT INCLUDES 1-Hammertool & 1-Drive punch

Reference

107203-KIT

107205-KIT

107207-KIT

107209-KIT

Description

G2002 / T10H Hammertool L : 42″ (1050 mm)

G2002 / T10H Hammertool L : 48″ (1200 mm)

G2002 / T10H Hammertool L : 54″ (1400 mm)

G2002 / T10H Hammertool L : 60″ (1400 mm)

 

Reference

107203

107205

107207

107209

Description

G2002 / T10H Hammertool L : 42″ (1050 mm)

G2002 / T10H Hammertool L : 48″ (1200 mm)

G2002 / T10H Hammertool L : 54″ (1400 mm)

G2002 / T10H Hammertool L : 60″ (1400 mm)

 

Spare parts:

Reference

107301

107302

107303

107304

107305

107306

107307

107310

4020088

Description

Matrix

G2002 / T10H drive-in punch

Broche (Guide Pin) 7mm

Round punch

Z-Bar Profiled punch (2 pieces)

Retaining Plate

Dowell Pin

S/S Comb

Drive Punch handle